This erratic behavior can considerably disrupt home security, especially at night when night vision is activated, if your Eufy camera night vision turning on and off. This is a brief guide on how to troubleshoot and fix this issue.
· Ensure that your Eufy camera setup is done correctly. Because of erroneous setup, certain features such as night vision may act sporadically.
· Once again, verify the placement of your camera as a lot of ambient light or direct exposure to a source of light can cause the night vision sensor to be confused and toggle unnecessarily.
· Move the camera or change its angle if needed.
· Then check your app settings, as well as your Eufy camera login information.
· Changes in firmware or account synchronization issues can sometimes cause the camera to behave oddly.
· To refresh your session, open the Eufy Security app, log out, and then log back in. It's an easy fix for a lot of little bugs.
· Update your camera's firmware.
· Problems with outdated firmware might impair the night vision.
· Check for updates available in the app and install them immediately.
· You could try activating night vision manually on the app if the problem persists.
· For certain people, toggling night vision off and back on again resets the sensor and stops the flickering.
· Also, try the following: check whether the camera is powered on and connected to Wi-Fi.
· Night vision can be affected if the camera is rebooting or malfunctioning due to a power or connectivity fluctuation.
· At this point, it may be necessary to call in the pros for help.
· They will be able to advise you whether a hardware replacement is necessary or give you advice specific to your device.
· These suggestions will allow you to restore dependable nighttime security monitoring and fix the Eufy Camera Night Vision turning-on-and-off problem.
You will find further assistance on our official website.